Fitting A Cat Flap

Installing a cat flap might be a bit daunting but it's simple by following the correct instructions. Firstly, determine how high you want the flap to be (on average the belly height). Then, mark this area on your door, and use the template included to guide you when drilling.

If you have a kitten, or a young kitten you can prop the door open very slightly and gradually encourage it to pass through. Reward it when it goes through.

Measure the Door

A cat flap allows your pet to go in and out of your home at the time that is convenient for you. This can keep your cat healthy since it will ensure that it gets enough exercise and will also allow it to return inside if it gets trapped outside in bad weather. This will cut down on the time you spend letting your cat flap in bifold doors go in and out and also make your home safe by letting you know when it has left.

It is crucial that the flap for your cat is correctly fitted to prevent your pet from escaping through it or be pushed through by other animals (e.g. dogs). You should measure the height of your pet's belly as well as the size of the doorway at your home to ensure the flap is at the right height. If your cat is larger or shorter than the average, you can alter the flap's height by moving it up or down by a tiny amount.

The next step is to make use of a spirit level to mark the center of the door where you will install the flap. Then, using the mark as a guideline, cut out the form of the flap on the door with the help of a jigsaw. After cutting the flap then sand the edges to create smooth surfaces. Drill any necessary holes.

Fitting a cat flap should not take longer than two hours. However, the process may be a bit more difficult if you need to fit it onto the frame of a uPVC or composite door as these doors come with an array of thicknesses that can affect the way the holes are cut and what they are fixed to. We always suggest to consult with a professional if this is your first experience with glass.

Measure Your Cat

You will not have to spend hours of ignoring the pet's meow to be let in or out. This is particularly helpful when your cat is inside in all weathers while you are at work.

If you're planning to put a cat flap on your door it is important that you measure your cat before attempting the task. Although it might appear to be to be a simple task, cat flap fitting it is important to measure the right way or your cat will be unable to use.

First, ensure that your cat is calm prior to taking measurements. You will have to hold your cat in a position in which they cannot move. Also, make sure that the measuring tape is straight and not bent against the body. By keeping the measuring tape or ruler against their body from their head to the base of their tail will enable you to make an precise measurement.

Once you have your cat's measurement, it's time to look at the door to decide the best place to place the flap. The flap should be placed at the level of your cat's belly. This will allow them to go through the door with minimal effort. This will also stop the flap from making a lot of noise as it moves back and forward.

You will need to think about the thickness of the uPVC or composite door as well. While timber doors are all of the same thickness, uPVC and composite doors may differ in their overall design, which can make fitting cat flap in upvc door panel a cat flap more complicated since you have to ensure that the hole you cut is the right size for your pet.

You can also use the template included in the instructions to mark the location of the hole on the door. This will allow you to determine where the hole must be placed and ensure that the template is placed precisely on the door. Using a spirit level to check that the template is flush against the door can prove beneficial.

Cut the Flap

Before you can put in your cat flap you need to cut the door's panel to make it large enough to accommodate it. This can be a challenging job, and it is recommended that you seek out the assistance of a professional cat flap fitting (visit your url) service for this job should you not have the knowledge or skills to do it yourself. It is also recommended to consult the instructions that come with the cat flap kit to discover how to do it correctly.

To do this, you will need to measure the height of your cat flaps for french doors or kitten's belly. Use this as a reference point. As a general rule you should place the flap approximately 10-15 centimeters above the ground. This is the average height of the stomach for cats. This way, your cat can move through the flap with ease and will also make any other cats or curious neighbours a tough time trying to leave or enter.

Once you've determined the best location for cat flap fitting the cat flap to be placed, mark this location on the door using pencil. If your kit comes with the template put it on top of the door. Utilize the markings on the template to drill holes in each corner. Then, you should be able to cut out the design of the template and replace it with your cat flap in bifold doors flap.

If you are installing your cat flap inside the form of a door made of wood or uPVC, it is possible to do this yourself if you feel confident enough to handle the jigsaw. Ensure that you do not cut through any of the door mullions or vertical rails. You can use a jigsaw cut the panel into a square or circle according to the design of your cat flap. Take your time and don't force the jigsaw into cutting faster.

After the hole has been made, carefully place the cat flap into its new place of residence. Make sure it's solidly secured. If it has caps on the screws, then place these onto the screws that protrude. Once the screws are in place, sand any rough edges of the cut and then seal any gaps to ensure there aren't any draughts getting into your home.

Fit the Flap

If you have an ordinary cat flap, you can try to encourage your pet to go through it by placing a small amount of cat food on the front of the door. You can also push the cat using the help of a stick or your hands. Once your pet has become comfortable moving through the flap, it will be in a position to move as it pleases. This will allow you to let it in and out whenever it wants.

You can install a cat flap into an UPVC or glass door although this may not be exactly the same as fitting one into a timber exterior door due to the fact that the UPVC and glass doors don't have a consistent thickness. This can affect the way you cut the hole for the flap, and can also affect whether your flap is fitted correctly after it has been installed.

Based on the type of cat flap you select It could be equipped with a mounting kit and template that will show exactly where to drill the holes for it. If the kit does not include an example, you can photocopy it to create your own. When cutting, it's important to avoid pushing the jigsaw too to the point that you create a larger hole than necessary in your door.

Most cat flaps are square or rectangular in shape, however there are also some which are circular, and are generally more difficult to place. If you have a circular flap, make sure that the hole is in the correct place on your door. In the event that it is not, the cat might not be able to use it, and may be locked outside for the entire day (or at night).

Certain cat flaps come with locks that let you control the time your cat can enter and leave. This is useful when your cat is scared of leaving in the dark or returning to the house at night. They are also useful for those who work all day. The lock can be turned on to allow entry or exit, and some locks can be locked in either direction allowing you to shut the door completely. This is particularly beneficial for sick or elderly cats who aren't willing to go out in bad weather.