A Guide To Fireplace Wall Mount From Beginning To End
Add Warmth to Your Home With a Fireplace wall fireplace Mount
Add ambiance and warmth to your office, home or commercial space with a fireplace wall mount. These wall mounts are simple to install and include mounting brackets that can be used for hanging or recessing into a wall.
For a simple and quick installation, follow the guidelines on the manufacturer's website. Make sure that the wall mounting bracket and the bottom of the fireplace fit together, then secure it to the wall.
Size
A wall mount electric fireplace can add a stunning centerpiece to a room, creating ambiance and warmth. These units come in a range of sizes that can fit in spaces. A smaller model is ideal for bedrooms while a larger unit can be utilised in a family room or living room. Certain models have an option to install recessed units against the wall to create a seamless look.
The height of a fireplace wall mount will also determine how it looks in the room. A lot of people put them higher up on the wall to create a dramatic impact. They are usually 6 to 12 inches above the floor. Some people prefer to mount the TVs at the standard height of 4.5-5 feet. This allows them to be seen by the majority of seats in the room.
No matter what size you decide to go with, there are some important aspects to take into consideration to ensure that your fireplace is safe and effective. It is recommended to keep all combustibles within three feet from the fireplace, including furniture, drapes, and other items. In addition, you should ensure that the brackets for mounting are securely attached to the studs if they are. If you are unable to locate studs, you should use plastic anchors to ensure that your fireplace will not be pulled loose.
Another important factor to consider when choosing a fireplace wall mount is the amount of heat that it produces. In general, you should select one that produces roughly the same amount as an ordinary electric heater. By following this rule of thumb, you can be confident that your new fireplace will be able to provide enough additional heating for the entire room.
Some fireplaces have unique features that set them apart from other fireplaces. For example, some offer remote control and adjustable brightness settings and no-heat settings. They also feature cool-to-the-touch glass and realistic-looking LED flames. Other noteworthy features include a built-in shelf to hold electronic devices, and a simple, no-professional-help installation process.
Installation
A fireplace wall mount, unlike a built-in electrical fire that must be wired to the electrical system in your home It is semi-permanent. It can be installed directly on a wall, or in a bracket that is then attached to the wall. It is important to select a location close enough to an outlet to allow the power cord reach it, while allowing for sufficient clearance from nearby objects. This is in accordance with the manufacturer's guidelines in the owner's manual.
Plug it in and experiment with the LED lights and settings before you begin the installation. This will let you know if the fireplace is ready for installation or if further testing is required.
Prepare the area in which you'll install your fireplace mount. Based on the type of fireplace, you may need to install an extension on the wall. Or, you might prefer to cover the wall in drywall. In the latter scenario, be sure to use appropriate techniques for drywall, like mudding and taping, and allow it to dry completely before proceeding.
After the walls have been prepared then secure the bracket to the wall using screws. The brackets should be fixed to the studs which are in the wall behind the drywall. This will stop the fireplace from falling loose from the wall in the future.
After the bracket has been secured, it's time to mount the fireplace. The design of the fireplace can differ but there will typically be a ledge where the fireplace rests and a space to attach it to brackets on top. Then, you can add any additional media, like logs or embers.
Some models let you connect the firebox and screen together to the wall bracket. This can make installation easier but you must make sure that everything is secured and fits properly prior to finishing.
After the fireplace has been installed, you can finish the look by either screwing the bracket on the wall and cutting off the excess wires. If you wish, you could also paint the wire covers that disguise your power cord.
Safety
A fireplace wall mount lets you to heat your home while saving valuable floor space. However, it is essential to be aware of safety precautions when using this type of fireplace. To avoid electric shock the first step is to ensure that the unit is grounded. You should also be sure to follow the manufacturer's guidelines for proper use.
While it is possible find electric fireplaces on the wall which don't produce any heat, most of them come with a heater to enhance the realism and ambiance of the flame effects. This is usually in the form of a fan-forced heater that blasts air through a heating element, however, some models might have an infrared heater as well.
After the fireplace has been installed it is important to be cautious not to touch the hot surface, as this can cause burns and damage the device. To minimize the risk of fire, keep combustibles at least three feet from the fireplace. Be sure not to block the vents on the back of the unit.
There are a few other security features to consider when selecting an electric fireplace wall mount. For example, you should make sure that the unit comes with an emergency shut-off feature to avoid overheating and fires. It is also a good option to select a model that has a low output of heat, as it will help save energy.
The material of the surround is also important. You should select one that is safe for children and pets like steel, glass, or wood veneers. Additionally, you should select a model that has a display panel or remote control so that you can operate it effortlessly.
There are many types of wall-mounted fireplaces wood, such as electric and ethanol. The best one for you will depend on your budget and the design of your home. No matter if you opt for an electric or ethanol fireplaces fireplace, you can be certain that it will add warmth and class to your home. Always adhere to the safety guidelines provided by the manufacturer. You should also ensure that your family and pets safe when using this fireplace.
Style
The style of the fireplace wall mount will determine the way it appears on your home's walls. Some models are designed to stand out, and others blend in with the decor of your room. For example, a modern model like the Streamlined wall-mounted electric fireplace has a the sleek front glass design and a minimalist design. It features top venting that lets heated air flow smoothly, while maintaining the elegant design of the fireplace. Its flat mount and easy to use remote make it easy to operate.
You can also find electric fireplaces that are wall mounted with more traditional looking mantels. These units are ideal for homes with open hearths, or those looking to transform a firebox that is wood-burning into an electric fireplace without chimney. These flat-wall fireplace bioethanol fire places come in various sizes and come with a shelf to display ornaments. They're a great option for bedrooms, living rooms and even home offices.
A gas wall-mount fireplace is a good option for those who want to create a warm welcoming and warm feel to their space. These units have a traditional log set and are available in several different frame styles such as black and natural stone. They also come with an ember bed that is customizable and LED flame colors for an individual touch. Some models have a TV mount built in for additional functionality.
Some models can be put directly on the wall, whereas others are designed to be partially or completely recessed into a wall. The Allusion wall-mount fireplace is small in size which permits it to be installed into 2x6 frame walls. You can, however, add a trim skirt to the exposed part. The Allusion also comes with a handy remote control and a variety of heating settings, so you can use your fireplace throughout the year.
Surface-mounted electric fire places usually project 4 to 6 inches into the room. They are therefore easier to install than those built into the wall cavity or recessed into a wall. They're also a great option for renters who don't want to have to deal with the hassle of drilling into their walls. You can simply remove or relocate the fireplace when you move.