The History Of In Wall Fireplace In 10 Milestones

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

A fireplace that is built-in gives a sleek, polished look without the expense of a mantle. It is among the easiest electric fireplaces to put in.

There are a few things to think about before purchasing an in-wall fireplace. To maximize the value of your investment, follow these tips for a successful purchase:.

Height

While it may appear to be something that is easy, figuring out the height of your fireplace is one of the most important decisions you make. This is because the height of your fireplace will impact everything from how it fits in a room to how easily it can be seen. Having your fireplace raised too high can look unnatural and detract from the beauty of the piece. On the other hand, having your fireplace too low will make it appear unattractive in the wall space.

Electric fireplaces can be mounted at different levels. Most people mount their fireplaces in a seated position at eye level. This requires a height between 40-42 inches. Some people put their fireplaces beneath their TVs. This can be an attractive option.

However, the height of your fireplace will be determined by certain factors, such as the size of the room and the length of the wall you want to mount it. The larger the space, the larger it can be. This could mean you are capable of fitting a larger fireplace into it. The length of the wall is also important since a wall that is larger can support a fireplace that is larger.

Another important aspect to consider is how you intend to use your fireplace. If you are planning to use it solely to decorate your home, it is recommended to choose a lower height. However, if you plan to heat your home with it, you'll need to make sure that the marble fireplace is tall enough to satisfy local codes and safety standards.

It is essential to choose the proper height for your fireplace so that it will match your decor and be simple to clean or fill. If you're unsure of the height to go with, you can always reach out to an expert Tabletop Fireplace installer for help. They will be able to suggest the ideal height for your fireplace based on their experience and your unique home.

Depth

It is crucial to know the depth of a fireplace if you plan to install it in a recessed location. If you're planning to cut into your wall, ensure that you have enough depth to accommodate the inner design of your fireplace (the smoke shelf above the firebox, the flue that runs through the roof, and the tabletop fireplace itself). Also consider the space you'll have for the surround, and whether or not you want a mantle.

Many of the latest electric fireplaces come with an interior depth that is almost concealed, creating the appearance of a "built-in" appearance. The Panorama Bi-Deep series is a fantastic example of this kind of wall-mounted electric fireplace. This model features a 5.8-inch depth that lets the viewer see the flames and the ember bed, not the frame of the fireplace. It also comes with a variety of media packages, such as natural-looking driftwood logs, white pebbles, or crystals of clear glass that reflect the flames and add luster to the ember bed.

Gas wall-mounted fireplaces can be found in both shallow and deep models. When deciding the depth of your fireplace, it is important to keep in mind that these units are supplemental heating sources and must be vented properly by a skilled professional. The length of the vent pipe, the length of the flue, as well as the distance between the stove and the vent are all factors that should be considered when determining the depth of a fireplace made of gas.

Whether you choose a surface mount or one-piece installation, it's essential to follow all of the instructions of the manufacturer when mounting your fireplace. A professional installer is recommended in most instances. It is good to have an extra person in the event of installing a gas fireplace.

Addition of an in-wall fire space to your home is a great option to enhance it and create ambience. It can also reduce your heating expenses. Furthermore, it's an excellent option if you are unable to fit a traditional fireplace in your home due to space limitations or due to the location of an existing chimney.

Surface Mount

If you're not able or prefer not to cut through your wall or construct an area to accommodate an electric fireplace A surface mount can give you an elegant and integrated style. Some models, like the Allusion line of electric fireplaces, can be installed partially recessed into a wall without compromising the heat output.

To start the installation process, determine where you want your fireplace to be located and mark it with a pencil on the wall where the bracket will be erected. Utilize a stud finder to locate the studs in that area and make sure every mounting bracket is in the vicinity of one or more studs to ensure stability. If a stud can't be reached or is not suitable for your fireplace, you can make use of drywall anchors for support.

Once you have marked the location of mounting brackets on the wall, use a power drill to screw them in and make sure they are in alignment with the studs. You can use studs or anchors made of plastic to secure each bracket. Once the mounting brackets have been installed then lift the fireplace up and hang it from the bracket. When the fireplace is in place ensure that it is level.

Before continuing with the installation, connect your fireplace and make sure that all the features are functioning properly - turn on the flame and ignite the flames, play around with the heat, ember bed lights and more. When you are satisfied with the results it is time to install the floating mantel.

Depending on the type of your fireplace, you'll either require a wire connection to the appliance wire connector in the bottom of the mantel or if the fireplace has slots or hooks on the back connecting them to slots on the wall mounting brackets. After you've completed this step make sure to consult the user manual for instructions on how to remove the front glass panel from the opening and replace it.

After you've removed the front panel of your fireplace and inserted it in its opening, follow your instructions in the manual to complete the install by replacing the glass front and adjusting the height if needed. If your fireplace has ember bed media, spread it across the top grate for a more natural appearance. Then, secure it with the screws that come with it.

Plug-In

These electric fireplaces do not require vents or chimneys like traditional wood-burning fireplaces. They plug into an outlet that is standard that can provide supplemental heating for rooms that are that are up 400 square feet in size. They also come with a variety of temperature and flame settings to allow you to customize the ambience. Some models have LED lighting effects that highlight the fire and embers. Other models include an upper grille grate that conceals manual controls, but easily can be opened to reveal buttons for your preferred setting.

Plug-in electric fireplaces can be hung directly on walls or installed into the wall for an aesthetically pleasing look. These units are typically simpler to set up than a mantel fireplace. Some models have a pedestal that permit you to place the fireplace on flat surfaces, such as a dresser or buffet. A remote control along with mounting hardware and a log set are included. Depending on the model, these electric fireplaces may include both flame and heat options that can be turned off to provide ambiance throughout the year.

Some models have adjustable privacy glass that can instantly change from completely transparent to partially. These models are popular for walls that separate spaces for entertainment like living and dining rooms. These models can be used in bedrooms, where adding fireplaces is a cost-effective option to warm a room and keep it private.

Although plug-in electric fireplaces don't require hardwiring as built-in models, they must be positioned on a wall that is at a minimum not stud-free and is able to support the weight of the fireplace. Certain models come with a kit that includes an already wired cord and special bracket that makes the installation process easier. This kit is suitable for drywall installation or concrete installation.

If you decide to install your electric fireplace electric in a wall ensure that it is near an outlet. Electric fire places with plug-ins can be connected to outlets that are on the same circuit as the electric fireplace or into a separate outlet. It's best to use an exclusive circuit to ensure that nothing else in your home will run at the same voltage, and possibly trip your breakers.