See What In Wall Fireplace Tricks The Celebs Are Using

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

An in wall fireplace provides an elegant and polished look without the expense of mantles. It is one of easiest electric fireplaces.

There are a few aspects to think about prior to purchasing an in-wall fireplace. To maximize the value of your investment, consider these tips for a successful purchase:.

Height

It may seem like an easy question but determining the size of your fireplace is one of the biggest decisions you will make. This is because the height of your fireplace will impact everything from how it will fit in a room to how easily it can be seen. If your fireplace is too high can look unnatural and detract from the beauty of the piece. A fireplace that is too low could be lost within the wall space.

Electric fireplaces can be mounted at different heights. For instance, most people choose to mount their fireplaces on the eye level from a seated position. This requires a height between 40-42 inches. Some people put their fireplaces under their TVs. This is an attractive option.

However, the size of your fireplace will depend on several factors, including the dimensions of the room as well as the length of the wall where you'd like to put it. The larger the space, the larger it can be. This could mean that you're capable of fitting a larger fireplace in it. The length of the wall is also important, as a longer wall will support a larger fireplace.

How you intend to use your fireplace is another important factor. If you only intend to use it for ornamental purposes, a lower level will work better. If you want to use it to heat your home you must ensure that the fireplace is sturdy and tall enough to meet safety standards.

It is important to choose the right height for your fireplace, so that it will match your decor and be easy to clean or fill. If you're not sure of the height to go with, you can always seek out an experienced fireplace installer for help. They can recommend the ideal height for your fireplace according to their experience and your home's design.

Depth

It is important to know the depth of a fireplace when you are planning to place it in an recessed position. If you're planning to cut into the wall, ensure that you have enough room to accommodate your fireplace's interior design (the space for the smoke shelf above the firebox and the flue that extends upwards from the roof). Also, think about the space you will have for the surround and whether you'd like a mantle.

A lot of the most recent electric fireplace models feature the depth of being almost invisible, creating an "integrated" appearance. The Panorama BI-Deep series is an excellent example of this kind of electric fireplace that is wall-mounted. It has a 5.8-inch depth that lets the viewer view the flames and the ember bed, but not the frame. It also comes with a variety of media packages, such as natural-looking driftwood logs that look like driftwood, white fireplace pebbles, or crystals of clear glass that reflect the flames and add luster to the ember bed.

Wall-mounted gas fireplaces are also available in shallow and deep versions. When deciding on the depth of your fireplace it is crucial to keep in mind that these fireplaces are supplementary heat sources and should be properly vented by a trained professional. The length of the vent pipe, the size of the flue and the distance from the stove to the vent are all aspects that need to be taken into consideration when determining the depth of a gas fireplace.

Whether you choose a surface mount or one-piece installation, it's essential to follow the manufacturer's instructions carefully when mounting your fireplace. In most instances, hiring a professional to install your fireplace is highly recommended. It is good to have an extra person in the event of installing a gas fireplace.

The addition of an in-wall fireplace place to your home is a fantastic way to add value to it and create an atmosphere. It also can help reduce your heating costs. It's also a great alternative for those who are unable to install an old-fashioned fireplace into your home due to space constraints or due to the location of a chimney.

Surface Mount

If you're not able or prefer not to cut through your wall or build out the space needed to install an electric firesuite fireplace suite, a surface mount gives a sleek and modern appearance. Some models, like the Allusion line of electric fireplaces, can be mounted partially recessed into a wall without compromising the heat output.

To begin the installation, mark the wall with a pencil on the wall where the bracket is to be placed. Utilize a stud locater to locate the studs within the area. Make sure the mounting bracket is directly in front of one or more studs for stability. If a stud can't be reached or isn't suitable for your fireplace, you could make use of drywall anchors for support.

After you have marked the location of mounting brackets on the wall using a power drill, you can use it to screw them in and ensure that they are in alignment with the studs. If possible, connect each bracket to a stud for strength and stability, but you can also use anchors made of plastic in the event of need. Once the mounting brackets are installed, lift the fireplace and hang it from the bracket. When the fireplace is installed be sure that it is level.

Before you proceed with the installation, connect your fireplace and ensure that all the features are functioning correctly. Turn on the fire, and then start the flames. play around with embers, heat, bed lights, etc. When you're satisfied with your results you can now install your floating mantel.

Based on the model of your fireplace It is possible to connect the wire connection to the appliance connector at the bottom of the mantel, or if it has slots or 021lyrics.com hooks connected to slots on the mounting brackets. Once you've done this you must follow the owner's manual for specific directions for removing the glass front panel and installing it into the opening.

Once you've removed the front panel of your fireplace and placed it into its opening, follow your instructions in the manual to complete the installation by replacing the glass front and adjusting the height if required. If your fireplace is equipped with ember bed media spread it across the top grate to give it a more natural appearance. Secure it using the included screws.

Plug-In

Electric fireplaces don't require chimneys or vents as do traditional wood-burning ones. They plug into a standard outlet that can provide supplemental heating for rooms that can be up 400 square feet in size. You can also adjust the ambiance with multiple settings for flame and heat. Some models come with LED lighting effects that accentuate the ember bed and fire. Some models have a top grille grate that conceals manual controls but can be opened to reveal pushbuttons for your preferred setting.

electric fires fire places with plug-ins can be installed directly on the wall or recessed for a built-in appearance. They are generally easier to install than a mantel fireplace. Some units come with a pedestal to allow you to put the fireplace on flat surfaces such as dressers or buffets. Included is an remote control, mounting hardware and the log set. Depending on the model, electric fireplaces can include flame and heat options that can be switched off to provide ambiance throughout the year.

Some models have privacy glass which can be changed in a flash from completely transparent to partially transparent. These models are popular for walls that divide zones of entertainment such as living and dining rooms. They can also be utilized in bedrooms where the addition of the fireplace is an affordable way to take the chill off the space without sacrificing privacy.

Plug-in electric fire places do not require hardwiring however they should be mounted on a wall capable of supporting their weight. Some models come with an accessory kit to make this process easier with a pre-wired power cord and a special mounting bracket. This kit is suitable for either drywall or concrete installation.

If you decide to install your electric fireplace in a wall, be sure that it is near an outlet. Plug-in electric fire (Obo officially announced) places can be connected to outlets on the same circuit as the electric fireplace, or into a designated outlet. It is recommended to have a separate circuit to ensure that there are no other appliances in your home can be powered by the same voltage. This could trip your breakers.