Guide To Outside Wood Burners: The Intermediate Guide To Outside Wood Burners

What You Need to Know About Outdoor Wood Burners

Outdoor wood burning stoves can be an efficient and cost-effective method of heating homes and businesses. They also help reduce the dependence on fossil fuels that are non-renewable and help to create a more resilient energy strategy.

A well-seasoned wood is vital for efficient burning. Green or unseasoned wood may have a higher moisture content, which can cause creosote to build up and decrease performance.

Efficient

Outdoor wood burners (OWBs) have been around for many years and provide an eco-friendly and energy efficient method of heating your home. The typical design of OWBs encourages the slowing of the fire, making it cooler which results in poorer combustion and a higher amount of smoke and creosote. These unburned fuels could cause health problems, fire hazards, outside wood burners and deteriorate the surrounding environment.

Furthermore, the visible smoke that OWBs emit can make neighbors angry and lead to DEC (Department of Environmental Conservation) enforcement actions. This type of public relations issue could cause serious damage to the value of your property and could even result in your OWB being shut down.

Crown Royal Stoves offers a line of EPA Certified outdoor wood furnaces that are referred to as the Pristine Gasification Series that utilizes technology to maximize combustion efficiency for a clean, smokeless combustion. This is achieved with a negative-pressure air system that pulls in fresh dry heated, filtered air from the bottom, and then pushes it up the chimney much faster than traditional outdoor contemporary wood burners boilers. This is accomplished through the unique design of a multi-pass, water filled heat exchanger constructed from 409 Titanium Enhanced Stainless Steel.

If properly used correctly, when properly used, the Pristine Gasification Series OWB can attain a 99% combustion efficiency for a cleaner, smokeless fire that requires less wood and produces fewer emissions than traditional OWBs. To enhance your OWB's performance, it is important to only burn dry, clean, seasoned wood. Seasoning your wood for 6 months or more prior to burning is recommended. This will ensure a more efficient energy efficient and efficient burn.

You can improve the efficiency of your wood-burning stove by executing each week a "dry burn". This method eliminates creosote build up, keeps your boiler efficient and extends its lifespan. Lastly by putting in a creosote removal stick every time you load your stove, you can dramatically reduce the amount of creosote that you use. This product is available from Wisconsin Wood Furnace.

Clean

A wood-burning stove can be extremely dirty due to burned soot particles. They are difficult to clean, so clean any buildup on the glass of your stove as soon as you notice it. Otherwise the soot will harden and be even more difficult to remove. Using the correct cleaners for the job is essential, but also be sure you're not damaging the glass's surface with anything that could scratch it. This could result in a weak spot that can shatter glass when exposed extreme temperatures.

Be sure to let your wood burner cool completely before cleaning it. Make sure that you protect the area around it with newspaper. This will prevent any spillage of ash that could stain and mark surfaces.

Based on the quality of the wood that you select, it can take up to one year for your stove to be properly and seasoned. The wood that is seasoned will not only burn better, but will create less creosote. This is the substance that is able to build up on your fireplace, decreasing its effectiveness and creating an opportunity for fire hazards. If you're using unseasoned wood or are just starting a new fire in your outdoor wood burner, the best thing to do is to open the back door to the lower part and scoop ashes out into a non-combustible container each week.

You should also do a sediment flush on your boiler at least once every four years. This is a quick five-second flush from the drain valve on your boiler. This will eliminate any debris that has accumulated inside the system and keep your boiler in great operating condition.

After you have cleaned the exterior of your fireplace Outside wood burners it is time to clean it. Before beginning, it is essential to cover the floor around the stove with newspaper. It is also helpful to wear protective eyewear and gloves. You should also have a metal ash canister, a scraping tool and a shovel. To safeguard the refractory, you must lay down a piece of cloth to protect it while you scrape away coal and ash deposits.

Easy to operate

Outdoor wood boilers (also called outdoor furnaces, outdoor wood hydronic heating systems or outdoor freestanding wood burner heaters) are often misunderstood despite their acclaim. They were one of the "it" trends of the 1990s, as were hairstyles for mullets. Contrary to the EPA's popular wood burners for sale stoves which are designed to burn at low, constant temperatures, these boilers have a higher fire rate and produce more smoke when they operate. Some local governments restrict or prohibit their use.

OWBs work best in homes with a high level of insulation. The visible, smoldering smoke can also be a source of complaint with neighbors and has led to many OWBs being shut-down or sued in the past. For OWBs dry wood that has less moisture content is needed to work effectively. The use of unseasoned or green wood reduces efficiency, leads to creosote to build up and may cut down the life of the burner. Drying wood can take time and a moisture meter is a must for any homeowner.

In contrast dual-stage wood gasification boilers (OWGB) make use of three steps of process that makes use of more available energy from the wood and results in a lesser amount of smoke. These furnaces are more efficient than traditional OWBs, and can be used for a wide range of fuels. Wood gasification boilers require dry, seasoned firewood. The majority of wood will season within the course of a year. Oak and other hardy trees may take as long as two years to mature. This is due to a lower amount of water and a higher density. This lets them store heat for longer, thereby increasing efficiency and decreasing pollution. The EPA's "Burn Wise" website and Cornell Cooperative Extension can help homeowners understand how to burn wood efficiently in order to reduce air pollution.

Low Maintenance

Modern outdoor wood furnaces have been designed with the environment in mind. Modern outdoor wood furnaces don't produce excessive CO2 or heat. They also burn cleaner than indoor wood stoves. They also require less wood to generate the same amount of heat as traditional stoves.

Outdoor wood burners require less maintenance and are more tolerant of moisture content in wood than wood burning stoves for indoor wood burner use. However outdoor wood burners can only be used with properly treated or "cured" wood. Some types of wood can last for up to a year. Use a moisture meter before loading to determine the amount of water contained in the wood.

In the course of operation, it is necessary to regularly check the system for creosote build up. Creosote is a byproduct from combustion and can accumulate in the chimney and flue when it is not cleaned on a regular basis. It can be eliminated by pouring a creosote removing product into the fire. Regular cleaning of the chimney and flue will remove dangerous creosote buildup and improve efficiency.

Crown Royal Stoves developed a new airflow technique called Negative Pressure Gasification to attain 99% efficiency in combustion. This technology is used in our EPA certified Pristine Series Outdoor Wood Furnaces to pull air up from the bottom and push all the gases through an sealed secondary combustion chamber, that is surrounded by water and easy-to-clean turbines. The result is a smokeless, pollution-free burn.