Ten Things Everyone Misunderstands About The Word "Fireplace Wall Mount."

Add Warmth to Your Home With a Fireplace Wall Mount

Create ambiance and warmth in your home, office or commercial space by installing a fireplace wall mount. They are simple to install and have mounting brackets that can be used to hang them or for recessing in a wall.

Follow the directions on the manufacturer's site for a quick, easy installation. Check that the wall-mounting bracket and the bottom of the fireplace fit together, and then attach it to the wall.

Size

A wall mount electric fireplace can be a stunning centerpiece to a room, bringing in ambiance and warmth. These units come in a variety of sizes that will fit all spaces. A smaller model is perfect for a bedroom, while larger ones could be placed in a living room or family room. Some models even offer the option of recessed installation to put them on the wall in a way that they are flush to give a seamless appearance.

The height of the fireplace wall mount can influence the way it appears within the space. A lot of people put them higher on the wall to create a dramatic impact. They typically sit six to 12 inches above the floor. Others prefer to place them at the normal TV height of 4.5 to 5 feet which allows the fire to be seen from a variety of seats in the room.

No matter what size you select regardless of the size you choose, there are a few important things to be aware of to ensure that your fireplace is safe and efficient. You should keep all combustibles at a minimum of three feet from the fireplace including furniture, drapes, and other things. If you can, also secure the brackets for mounting to studs. If you are unable to locate studs, you should use plastic anchors to ensure that your fireplace will not be taken away.

Another important aspect to take into account when choosing the right fireplace wall mount is the amount of heat it generates. A good rule of thumb is to choose a fireplace that produces roughly the same amount of heat as your typical electric heater for your home. This guideline will ensure that your fireplace can provide enough heat to the entire space.

Certain stone fireplaces come with unique features that set them apart from the competition. Some fireplaces come with remote control, adjustable settings for brightness, as well as no-heat mode. They also come with cool-to-touch glass and realistic-looking LED flames. Other notable features include a convenient built-in shelf for holding electronics, and a simple installation process that doesn't require any professional assistance.

Installation

Unlike a built-in electric fire that requires a hard-wired connection to the electrical system of your home, fireplace wall mounts are semi-permanent. It can be erected directly onto the wall or a bracket that in turn is mounted on the wall. It is crucial to select an area that is close enough to an outlet to allow the power cord reach it, while allowing for sufficient clearance from other objects. This is in line with the manufacturer's recommendations in the manual for your owner.

Before beginning the installation process, be sure that your fireplace is in good order by plugging it in and playing around with its LED lights and heat settings. This will tell you whether it is ready for installation or if it needs to be checked further.

Plan the space where you plan to install your fireplace mount. Depending on the model you purchase, this might involve installing a bump out on the wall or covering the existing wall with drywall. In the latter scenario, be sure to use the correct drywall techniques, such as mudding and taping, and allow it to dry completely before proceeding.

After the walls have been prepped and the bracket is secured to the wall using screws. These brackets must be placed into the studs that are in the wall behind the drywall. This will prevent the fireplace from being pulled away from the wall later on.

Once the bracket is secured, it's now time to mount the fireplace itself. The design of the fireplace can differ but there will typically be a ledge at the point where the fireplace is placed and a place to connect it to brackets on top. Then, you can put any other media, such as stones, embers, logs or a grate within the fireplace.

Alternatively, some models allow you to fit the firebox and screen as a unit to the wall fireplace bracket. This makes installation even simpler but it is crucial to ensure that everything is fitted correctly and is tight before the final step.

Once the fireplace is in position and the fireplace is set, you can finish the appearance by tacking or screwing the bracket to the wall and cutting any wires that aren't needed. You can also consider using paintable wire covers to hide the power cord if you wish.

Safety

A fireplace wall mount allows you to warm your home and save valuable floor space. However, it is important to be cautious when using this kind of fireplace. To avoid electric shock, the first step is to ensure that the unit is grounded. Be sure to read the instructions provided by the manufacturer for proper use.

Although it is possible to find electric fireplaces on the wall which don't produce any heat, the majority will feature a form of heater to maximise the authenticity and ambiance of the flame effects. It usually takes the form of a fan-forced heating device that blows air through a heating element however, some models might feature an infrared heating element too.

After the fireplace has been installed It is essential to be careful not to contact the hot surface because this can cause burns and damage to the appliance. To avoid the risk of fire, keep combustibles at least three feet away from the fireplace. Be sure not to block vents at the back of the unit.

When choosing an electric wall mount fireplace, there are some additional safety features you must consider. For instance make sure that the model comes with an emergency shutoff switch to prevent burning or overheating. It is also recommended to purchase an appliance that has a low temperature output, since it will help conserve energy.

The material used for the surround is also crucial. You should select a material that is safe for children and pets like steel, glass or wood veneers. In addition, choose a model with a display panel or remote control to enable you to operate it easily.

There are numerous electric and ethanol varieties of wall-mounted fireplaces. The best one for you will depend on your budget and the design of your home. You can be certain to add warmth and class in your home, whether you opt for an ethanol or electric fireplace. However, you should always adhere to the safety guidelines of the manufacturer and ensure that your family, pets and friends safe while using this fireplace.

Style

The design of the fireplace wall mount will determine how it looks on your walls. Certain models are designed to stand out, while others blend into the decor of your room. For instance, a modern model like the Streamlined wall-mounted electric fireplace has a a sleek front glass face and a minimalist profile. It offers top venting that allows heated air to circulate seamlessly while maintaining the fireplace's stylish design. Its flat mount and easy to use remote make it easy to operate.

You can also find wall-mount electric fireplaces that feature mantels with a more traditional design. These are great for homes that already have an open hearth, or who wish to transform their fireplace with wood fireplace burning into an electric fireplace without chimney. Flat-wall fireplaces come in various sizes, and they usually come with a shelf for display decorations. These fireplaces are ideal for bedrooms, living spaces and home offices.

Gas wall-mount fireplaces are another ideal option for those who want to create a warm, welcoming atmosphere in their home. These units come with a traditional log set and are available in several frame styles including black and natural stones. They also come with a customizable ember bed and LED flame color options for a custom, personalized touch. Certain models have a TV mount that is built-in for additional functionality.

Some models are designed to be mounted directly onto the wall while others can be recessed or completely into a wall. The Allusion wall-mount fireplace has a tiny footprint which permits it to be installed into 2x6 frame walls. However, you can put a trim skirt on the exposed area. The Allusion features a handy remote and multiple heating settings, allowing you to enjoy the fireplace throughout the year.

Surface-mounted electric fireplaces typically project from 4" to 6.5" into the room, which makes them simpler to install than models that are built into the wall or built from an existing wall cavity. They're also a great option for renters who don't want to endure the hassle of drilling holes into their walls. You can simply remove or move the fireplace whenever you move.