Why In Wall Fireplace Is More Difficult Than You Think

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

An in-wall fireplace gives an elegant and polished appearance without the cost of a mantle. It is among the easiest electric fireplaces to set up.

There are a few aspects to think about prior to purchasing an in-wall fireplace. Follow these tips to make the most out of your investment.

Height

While it may appear to be a simple question but determining the height of your new fireplace is one of the most important decisions you make. The size of your fireplace's height can affect everything, from how it fits into a room to its visibility. Having your fireplace raised to high could make it look unnatural and take away from the beauty of the piece. On the other the other hand, having your fireplace set too low could cause it to disappear in the wall space.

Luckily, electric fireplaces - please click the following web site - are versatile enough to be placed at various heights. Most people mount their fireplaces sitting at eye level. This usually requires a height of between 40 and 42 inches from the floor to the bottom of the fireplace. Some fireplaces are mounted under their TVs, which can be a visually appealing option.

The height of your fireplace depends on a variety of factors such as the dimensions and length of the wall you plan to put it on. The larger the space is, the bigger it will be. This could mean that you are capable of fitting a larger fireplace in it. The length of the wall is also crucial since a wall that is larger can accommodate a bigger fireplace.

The way you intend to use your fireplace is another important aspect. If you intend to use it for fireplace ornamental purposes, a lower level will work better. If you intend to use it to heat your home you must ensure that the fireplace is strong and tall enough to meet the safety standards.

It is crucial to select the proper size for your fireplace to ensure that it is in line with your decor and be easy to clean or fill. If you're not sure of the best height to choose, you can always contact a professional fireplace installer for assistance. They can suggest the best height for your fireplace, according to their experience and your home's design.

Depth

A fireplace's depth is important to know if you plan to put it in a recessed position. If you plan to cut into the wall, ensure that you have enough space to accommodate your fireplace's interior design (the space for the smoke shelf above the firebox as well as the flue that rises from the roof). You should also consider the space available for the surround and if you'd like a fireplace mantle.

A lot of the most recent electric fireplaces have an incredibly deep depth that is concealed, giving them an "integrated" appearance. This type of wall fireplace made from electric is best demonstrated by the Panorama BI Deep series. It has a 5.8-inch depth that lets viewers to view the flames and ember bed and not the frame. The media package includes driftwood logs in natural colors, white pebbles or crystals of clear glass to increase the embers' glow and reflect the flames.

Gas wall-mounted wooden fireplaces can be found in deep and shallow models. When deciding on the depth of your fireplace, it is essential to keep in mind that these units operate as a supplemental heat source and must be properly vented by a knowledgeable professional. The length of the vent pipe, the size of the flue, and the distance between the stove and the vent are all aspects that need to be taken into consideration when determining the depth of a fireplace made of gas.

If you decide to go with a surface mount or one-piece installation, it's crucial to read and adhere to the manufacturer's instructions when mounting your fireplace. A professional installer is recommended in all cases. Also, it is always good to have an extra person on hand when installing a gas modern fireplace.

The addition of a fireplace in the wall space to your home is a fantastic way to increase the value of it and add ambience. It can also reduce the cost of heating. Additionally, it's an ideal option if are unable to fit traditional fireplaces in your home because of space constraints or due to the location of your existing chimney.

Surface Mount

Surface mounts are a great alternative if you don't want to or aren't able to cut into the wall to install an electric fireplace. They also provide a sleek, built-in appearance. Some models, like the Allusion line of electric fireplaces, can be installed partially recessed into walls, without compromising heat output.

To begin the installation process, identify the location where you would like your fireplace to be installed and make a mark with a pencil on the wall where the bracket will be installed. Utilize a stud finder to locate the studs within the area. Make sure each mounting bracket will be directly in front of one or more studs to ensure stability. If a stud is not within reach or won't work for your fireplace, make use of drywall anchors to support the mounting bracket.

Once you have identified the location of the mounting brackets on the wall using a power drill, you can use it to install them and make sure they are in alignment with the studs. If possible, connect each bracket to a stud for security and strength, but you can also use anchors made of plastic in the event of need. After the mounting brackets are installed then lift the fireplace up and hang it from the bracket. When the fireplace is installed be sure that it is level.

Before continuing with the installation, connect your fireplace and check that all features are working correctly. Turn on the flame and ignite the flames, play around with the heat, ember bed lights and so on. Once you are satisfied with the results it is time to install the floating mantel.

Depending on the model of your fireplace, you'll require a wire connection to the appliance wire connector at the lower part of the mantel. Or if the fireplace has hooks or slots on the back connecting them to slots on the wall mounting brackets. Once you've completed this step, consult your fireplace's user manual for directions on how to remove the glass front panel from the opening and replace it.

Once you've removed your front panel of your fireplace and placed it into its opening, follow the manual's specifications to finish the install by replacing the glass front and adjusting the height if required. If your fireplace includes ember bed media, place it over the top grate for a more natural appearance. Then secure it with the screws that come with it.

Plug-In

Contrary to traditional wood-burning fireplaces electric fireplaces don't require chimneys or vents. Plugged into a standard outlet they provide supplemental heating for rooms up to 400 square feet. You can also adjust the atmosphere with different settings for flame and heat. Some models come with LED lighting effects that accentuate the fire and ember bed. Some models have a grille on top which hides the manual controls, however they can easily be opened to reveal pushbuttons.

Plug-in electric fireplaces can be hung directly on walls or recessed into the wall for an elegant look. These fireplaces are usually more straightforward to set up than a mantel fireplace. Some models come with a pedestal to permit you to place the fireplace on flat surfaces such as a dresser or buffet. Included is an remote control, mounting hardware, and the log set. Based on the model, these electric fireplaces can include heat and flame options that can be turned off for all-year-round comfort.

Certain models come with adjustable privacy glass that can change instantly from fully see-through to partially transparent. This feature makes these models popular for walls that divide common entertainment spaces like dining and living areas. They can even be used in bedrooms where the addition of a new fireplace is a cost-effective way to reduce the chill in a room without sacrificing privacy.

While plug-in electric fireplaces don't need to be hardwired like traditional fireplaces, they must be installed on the wall that is at the very least not stud-free and is able to support the weight of the fireplace. Certain models come with a kit that comes with a pre-wired cord and a special bracket to make the installation process less difficult. This kit is suitable for concrete or drywall installation.

When deciding on a place for your wall-mounted electric fireplace, ensure it's near an electrical outlet. Depending on the model, plug-in electric fireplaces can be plugged into outlets that are on the same circuit, or a separate one for your electric fireplace. It is recommended to use an exclusive circuit to ensure that nothing else in the home will run on the same voltage and could cause a trip to your circuit breaker.